29
Initial
Preparation
You should program the date and time, your logo and facsimile telephone number. This information will be
printed on each page transmitted from your unit, fulfilling the requirements of the Telephone Protection Act of 1991.
Fax Correspondence
Your logo Your facsimile telephone number
Date and time
FROM : Panasonic Fax FAX NO. : 1234567 Feb. 26 1998 04:02PM P1
Example:
Date and time, your name and facsimile
telephone number
Setting the date and time
Setup
STOP
START/COPY/SET
Dial keypad
MENU
JOG DIAL
/
1
Press .
Display:
2
Press , then .
3
Press .
Cursor
4
Enter the correct month/day/year by selecting
each 2 digits using the dial keypad or .
If using , press to move the
cursor.
Example (using the dial keypad): Aug. 10, 1998
Press .
5
Press .
6
Enter the correct hour/minute by selecting each
2 digits using the dial keypad or .
If using , press to move the
cursor.
Press to select “AM” or “PM”.
Example (using the dial keypad): 3:15PM
1. Press .
2. Press until “PM” is displayed.
TIME: 03:15PM
TIME: 03:15AM
1 50 3
JOG DIAL
JOG DIAL
TIME: 12:00AM
START/COPY/SET
M:08/D:10/Y:98
00 1 88 9
JOG DIAL
JOG DIAL
M:01/D:01/Y:98
START/COPY/SET
SET DATE & TIME
0 1
1.SYSTEM SET UP
MENU
Note:
●
The key can be used to select “AM” or
“PM” wherever the cursor is located.
●
The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
●
Press or to move the cursor to the
incorrect number, then make the correction.
●
If you press while programming, the
display will return to the previous one.
STOP
7
Press .
8
Press .
MENU
SETUP ITEM
[ ]
START/COPY/SET