Filter
Top Products
105
Answering
Device
Ring count in the TAD/FAX mode
This feature determines the number of rings before the unit answers a call in the TAD/FAX mode.
You can choose from 1, 2, 3, 4, TOLL SAVER and RINGER OFF.
TOLL SAVER: When you call the unit from a remote location, the number of rings will tell you if there are any
new voice messages. If the unit answers on the second ring, there is at least one new
recorded message. If the unit answers on the fourth ring, there are no new recorded
messages. To save the toll charges for the call, hang up immediately when you hear the third
ring. The third ring indicates that there are no new recorded messages.
RINGER OFF: The unit will answer without ringing.
Helpful hints:
● To answer a call before the unit does, increase the number of rings.
● If you find difficulty in receiving faxes from machines that have an automatic transmission feature, decrease
the number of rings.
START/COPY/SET
Dial keypad
MENU
/
1
Select “TAD/FAX” in step 4 of feature setting #77
(see page 73).
2
Press .
Display:
3
Press , then .
4
Press .
5
Press or to select the desired setting.
6
Press .
7
Press .
MENU
SETUP ITEM
[ ]
START/COPY/SET
RING=2
▼ ▲
START/COPY/SET
TAD RING COUNT
0 6
1.SYSTEM SET UP
MENU
Options
Note:
●
If you subscribe to a Caller ID service, set this ring
count setting to 2 or more rings.