Panasonic KX-FP270 Fax Machine User Manual


 
65
Fax/Copy
The unit is able to scan and store documents into memory, and then transmit the stored documents.
The memory capacity is approx. 25 pages based on the CCITT No. 1 test chart in standard resolution. For the
CCITT No. 1 test chart, see page 128.
START/COPY/SET
Dial keypad
MENU
/
1
Press .
Display:
2
Press , then .
3
Press .
4
Press or to select “ON”.
If this feature is not required, select “OFF”.
5
Press .
6
Press .
MENU
SETUP ITEM
[ ]
START/COPY/SET
MODE=ON
▼ ▲
MODE=OFF
▼ ▲
START/COPY/SET
SEND BY MEMORY
1 5
1.SYSTEM SET UP
MENU
From memory
Setting memory transmission
FACE DOWN
One-Touch
Dial keys
START/COPY/SET
STOP
JOG DIAL
Dial keypad
1
Insert the document FACE DOWN.
2
Enter the fax number using the dial keypad,
One-Touch Dial or .
3
When using the dial keypad or , press
.
The document will be fed into the unit and
scanned into memory.
After storing all of the pages, the unit will transmit
the documents.
The amount of memory used will be shown as a
percentage on the display.
Display:
Amount of memory used
PAGES=01 05
START/COPY/SET
JOG DIAL
JOG DIAL
Transmitting documents from memory
Note:
The stored documents will be automatically erased after transmission.
To cancel the memory transmission, press during or after scanning the document.
If you select the fine, super fine or half tone resolution, the number of documents that can be sent will decrease.
If the stored pages exceed the memory capacity, the transmission will be canceled.
STOP
Sending Faxes