Filter
Top Products
1. Introduction and Installation
11
Installation
1.5 Ink film
1.5.1 Installing the ink film
1 Open the front cover (1) by pulling up the
centre part (2).
2 Release the back cover by pushing the green
button (1) on the right side of the unit.
OR
Release the back cover by pushing the green
lever (2) in the unit.
3 Open the back cover (1).
4 Insert the gear with the blue core of the front
ink film roll (1) into the left slot of the unit
(2).
Insert the rear ink film roll (3).
L The ink film is safe to touch, and will not
rub off on your hands like carbon paper.
5 Turn the gear with the blue core (1) in the
direction of the arrow.
1
2
1
2
1
2
1
3
1
FP343AL.book Page 11 Tuesday, August 5, 2003 3:20 PM