Filter
Top Products
1. Introduction and Installation
12
L Make sure that the ink film is wrapped
around the blue core (2) at least once.
6 First close the back cover securely (1) by
pushing down on the dotted area at both
ends (2). Then close the front cover
securely (3).
1.5.2 Replacing the ink film
The included film roll is a starter ink film. To
ensure that the unit operates properly, we
recommend the use of Panasonic replacement
film. See page 9 for accessory information.
L We cannot be responsible for any damage to
the unit or degradation of print quality which
may occur from the use of non-Panasonic
replacement film.
1 Open the covers (see steps 1 to 3 on page
11).
2 Remove the used core (1) and used ink film
(2).
3 Remove the stoppers (1) and tags (2) from
the new ink film (3).
4 Insert the ink film and close the covers (see
steps 4 to 6 on page 11).
Tight
1 turn
Slack/Crease
Reverse
Correct
The ink film is not wrapped
around the blue core.
Incorrect
2
2
1
3
2
1
2
1
1
3
FP343AL.book Page 12 Tuesday, August 5, 2003 3:20 PM