Filter
Top Products
8. Help
45
L Make sure that the ink film is wrapped
around the blue core (2) at least once.
6 First close the back cover securely (1) by
pushing down on the dotted area at both
ends (2). Then close the front cover
securely (3).
7 Remove the recording paper and straighten.
Pull the tension plate forward (1) and hold
open while inserting the paper.
8.4.2 When the recording paper
was not fed into the unit properly
The display will show the following.
CHECK PAPER
Remove the recording paper and straighten. Pull
the tension plate (1) forward and hold open
while inserting paper.
Press {START} to clear the message.
Tight
1 turn
Slack/Crease
Reverse
Correct
The ink film is not wrapped
around the blue core.
Incorrect
2
2
1
3
1
1
{START}
FP343AL.book Page 45 Tuesday, August 5, 2003 3:20 PM