9. Programmable Features
49
9.2 Basic features
Feature/Code Selection
Setting the quick setup
{#}{1}{0}{0}
(KX-MB781 only)
You can print out the quick fax setup guide and select the desired receiving
mode depending on your situation.
{1} “FAX ONLY” (default): Use only as a fax (page 40).
{2} “DIST. RING”: With the Distinctive Ring service (page 47).
{3} “EXT. TAM”: With an external telephone answering machine (page 42).
{4} “TEL ONLY”: Mostly phone calls (page 41).
1. {MENU} i {#}{1}{0}{0}
2. {SET}
3. Press {SET} again to print the quick fax setup guide.
L If you do not wish to print it, press {STOP}.
4. Press {1} to {4} to display the desired setting.
5. {SET} i {MENU}
Setting the date and time
{#}{1}{0}{1}
(KX-MB781 only)
Enter the date and time using the dial keypad. See page 19 for details.
Setting your logo
{#}{1}{0}{2}
(KX-MB781 only)
Enter your logo using the dial keypad. See page 20 for details.
Setting your fax number
{#}{1}{0}{3}
(KX-MB781 only)
Enter your fax number using the dial keypad. See page 20 for details.
Selecting the language
{#}{1}{1}{0}
The display and reports will be in the selected language.
{1} “ENGLISH” (default): English is used.
{2} “SPANISH”: Spanish is used.
1. {MENU} i {#}{1}{1}{0}
2. Press {1} or {2} to select the desired language. i {SET} i {MENU}
Setting the dialing mode
{#}{1}{2}{0}
(KX-MB781 only)
{1} “PULSE”
{2} “TONE” (default)
See page 16 for details.
Setting flash time
{#}{1}{2}{1}
(KX-MB781 only)
The flash time depends on your telephone exchange or host PBX.
{0} “900ms”
{1} “700ms” (default)
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “200ms”
{7} “160ms”
{8} “110ms”
{9} “100ms”
{*} “90ms”
{#} “80ms”
Note:
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the LCD display
contrast
{#}{1}{4}{5}
{1} “NORMAL” (default)
{2} “DARKER”
MB271-781-PFQX2722ZA-OI-en.book Page 49 Tuesday, May 22, 2007 5:20 PM