14. General Information
85
ITU-T No.1 Test Chart
Note:
L Design and specifications are subject to change
without notice.
L The pictures and illustrations in these instructions
may vary slightly from the actual product.
L The accuracy of the clock is approximately ±60
seconds a month (KX-MB781 only).
Recording paper specifications
Recording paper size:
Letter: 216 mm × 279 mm (8
1
/
2
" × 11")
Legal: 216 mm × 356 mm (8
1
/
2
" × 14")
A4: 210 mm × 297 mm (8
1
/
4
" × 11
11
/
16
")
Label size:
Letter: 216 mm × 279 mm (8
1
/
2
" × 11")
A4: 210 mm × 297 mm (8
1
/
4
" × 11
11
/
16
")
Recording paper weight:
60 g/m
2
to 90 g/m
2
(16 lb. to 24 lb.)
Note for recording paper:
L We recommend that you test paper (especially
special sizes and types of paper) on the unit before
purchasing large quantities.
L Do not use the following types of paper:
– Paper with cotton and/or fiber content that is over
20 %, such as letterhead paper or paper used for
resumes
– Extremely smooth or shiny paper, or paper that is
highly textured
– Coated, damaged or wrinkled paper
– Paper with foreign objects attached, such as tabs
or staples
– Paper which has dust, lint or oil stains
– Paper that will melt, vaporize, discolor, scorch or
emit dangerous fumes near 200 °C (392 °F),
such as vellum paper. These materials may
transfer onto the fusing roller and cause damage.
– Moist paper
– Inkjet paper
L Some paper only accepts print on one side. Try using
the other side of the paper if you are not happy with
the print quality or if misfeeding occurs.
L For proper paper feeding and best print quality, we
recommend using long-grained paper.
L Do not use paper of different types or thickness at the
same time. This may cause paper jams.
L Avoid double-sided printing.
L Do not use paper printed from this unit for double-
sided printing with other copiers or printers. This may
cause paper jams.
L To avoid curling, do not open paper packs until you
are ready to use the paper. Store unused paper in
the original packaging, in a cool and dry location.
■ Power supply:
120 V AC, 60 Hz
■ Memory capacity
(for operation and storing memory):
32 MB
■ Fax memory capacity
*1
:
2 MB in total
Approx. 170 pages of memory reception
Approx. 150 pages of memory transmission
(Based on the ITU-T No. 1 Test Chart in standard
resolution, without using the Error Correction Mode.)
■ Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 810 nm
Emission duration: Continuous
■ Print speed:
Approx. 18 ppm (pages per minute)
■ Printing resolution:
600 × 600 dpi
*1 KX-MB781 only
*2 Transmission speed depends on the contents of the
pages, resolution, telephone line conditions and
capability of the other party’s machine.
*3 Transmission speed is based on the ITU-T No. 1 Test
Chart with original mode. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
MB271-781-PFQX2722ZA-OI-en.book Page 85 Tuesday, May 22, 2007 5:20 PM