Filter
Top Products
37
Chapter 3 Copier Settings
10 - 19 10 Bleedthrough Prevention Set the default bleedthrough
prevention.
Off, Level:1 to Level:6 Off
11 Contrast Set the default contrast. -3 to +3 0
12 Sharpness Set the default sharpness. -3 to +3 0
13 Saturation Set the default color saturation. -3 to +3 0
14 Tint Set the default tint. -3 to +3 0
15 Color Balance Set the default color balance for
Cyan, Magenta, Yellow and
Black.
(Darker, Medium and Lighter
Areas)
-3 to +3 0
20 - 29 21 Page Insertion Default Set the default page insertion. Blank, Copy Blank
22 Cover Mode Default Set the default Cover Mode. F, Blank,
F, Copy,
FB, Blank,
FB, Copy
(F: Front cover, FB:
Front & Back cover)
F, Blank
23 Job Build and SADF Mode Enable or disable SADF Mode. No, Yes Yes
24 Maximum Copy Setting Set the limit copy count. 0 to 99
(0: No limit)
0
25 M1, Size Change the skyshot size
registered on the M1 key.
X: 5 to 432mm
Y: 5 to 297mm
70, 160
(mm)
26 M2, Size Change the skyshot size
registered on the M2 key.
X: 5 to 432mm
Y: 5 to 297mm
95, 220
(mm)
27 Memory Overflow Warning Set sort copying when the
memory is full.
•Print
The read original is copied.
• Cancel
The read original is deleted.
Print, Cancel Print
28 Color Spec (1Color) Set the default one color.
z “Preset 1 to 6” can be
selected when you set “20
Add User Color” in Copier
Settings.
Red, Yellow, Green,
Magenta, Blue, Cyan,
Preset1, Preset2,
Preset3, Preset4,
Preset5, Preset6
Red
29 Color Spec (2Color) Set the default two colors.
z “Preset 1 to 6” can be
selected when you set “20
Add User Color” in Copier
Settings.
Red, Yellow, Green,
Magenta, Blue, Cyan,
Preset1, Preset2,
Preset3, Preset4,
Preset5, Preset6
Red
Key Operator
No. Parameter Comments Selective Item
Standard
Setting