Filter
Top Products
3. Telephone
37
step 1 to change the dialing mode
temporarily to tone.
L To prevent misdialing, we recommend you
add pauses where needed when storing
numbers. For example, add pauses after a
telephone number when storing in the phone
book (page 35) if a PIN number is to be dialed
after it.
3.4.2 With the base unit
1 Press {>}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {SP-PHONE}.
L The unit will start dialing automatically.
To search for a name by initial
Example: “LISA”
1. Press {>}.
2. Press {A} or {B} to initiate the phone book.
3. Press {5} repeatedly to display any name
with the initial “L” (see the character table,
page 30).
L To search for symbols, press {1}.
4. Press {B} repeatedly to display “LISA”.
L To stop the search, press {STOP}.
L To dial the displayed number, press {SP-
PHONE}.
3.5 Editing a stored item
L Keep the front cover page open for button
locations.
3.5.1 With the handset
Make sure the handset is not being used.
1 Press {Phone book} (soft key).
2 Press {Search} (soft key).
3 Press {v} or {e} repeatedly to display the
desired item.
4 Press {Edit} (soft key).
L If you do not need to edit the name, skip
to step 6.
5 Edit the name. For further details, see the
storing procedure on page 35.
6 Press {v}.
L If you do not need to edit the telephone
number, skip to step 8.
7 Edit the telephone number. For further
details, see the storing procedure on page
35.
8 Press {v}.
9 Press {Save} (soft key).
10 Press {OFF}.
3.5.2 With the base unit
1 Press {>}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {MENU}.
4 Press {*}.
L If you do not need to edit the name, skip
to step 6.
5 Edit the name. For further details, see the
storing procedure on page 35.
6 Press {SET}.
L If you do not need to edit the telephone
number, skip to step 8.
7 Edit the telephone number. For further
details, see the storing procedure on page
35.
8 Press {SET}.
9 Press {STOP}.
FPG379-PFQX2138ZA-en.book Page 37 Wednesday, January 12, 2005 4:49 PM