Filter
Top Products
3. Telephone
43
phone number with another pattern (page 41,
42).
L When this feature is set to OFF the unit will
still be able to display Caller ID, but incoming
Caller ID numbers will not be automatically
edited.
L If you move to another area, you may need to
turn this feature OFF to erase the previously
edited area codes. To use this feature again,
turn it ON and reprogram the area codes you
want to be edited once again.
3.11 Erasing caller
information
L Keep the front cover page open for button
locations.
3.11.1 Erasing all caller
information
With the handset
Make sure the handset is not being used.
1 Press {Rcvd calls} (soft key), {v} or {e} to
display a caller information.
2 Press {All erase} (soft key).
L To cancel erasing, press {No} (soft key).
3 Press {Yes} (soft key).
With the base unit
1 Press {MENU} repeatedly to display
“CALLER SETUP”.
2 Press {SET}.
L “CALL LIST ERASE” will be displayed.
3 Press {SET}.
L To cancel erasing, press {STOP}, then
{MENU}.
4 Press {SET}.
5 Press {STOP}.
3.11.2 Erasing specific caller
information
With the handset
Make sure the handset is not being used.
1 Press {Rcvd calls} (soft key), {v} or {e} to
display a caller information.
2 Press {v} or {e} repeatedly to display the
desired item.
3 Press {Erase} (soft key).
L To erase other items, repeat from step 2.
4 Press {OFF}.
With the base unit
1 Press {CALLER ID}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {ERASE}.
L To erase other items, repeat from step 2.
4 Press {STOP}.
FPG379-PFQX2138ZA-en.book Page 43 Wednesday, January 12, 2005 4:49 PM