Filter
Top Products
7. Answering Machine
63
Remote Operation
7.5 Operating from a remote location
You can call your unit from a remote location and access the answering machine.
Important:
L Program the remote operation ID beforehand (feature #11 on page 69, or page 77).
L Set the unit to TAM/FAX mode before going out (page 52).
L Use a touch tone telephone for remote operations.
Helpful hints:
L When you press a key, press firmly.
L Please make a copy of the following table, and carry it with you when you go out.
7.5.1 Summary of remote
operation
1 Call your unit.
2 Enter the remote operation ID during the
TAM/FAX greeting message.
3 When there are new recorded messages
L The voice guide will tell you the number of
new messages and they will be played
automatically.
When there are no new messages
Voice guide:
“No new messages.”
When voice memory is full
Voice guide:
“Sorry, no more memory. Please erase
unnecessary messages.”
Erase any unnecessary messages.
4 To end remote operation, hang up.
Answering machine remote operation
1. Call your unit.
2. Enter the remote operation ID during the
TAM/FAX greeting message.
3. Enter a remote command within 10 seconds.
{7} Records greeting message
{9} Stops recording of the greeting
message
{*}{4} Erases a specific message
{*}{5} Erases all messages
Key Remote command {8}{0} Turns OFF the answering machine
{1} Repeats a message {8}{1} Turns ON message transfer
{2} Skips a message {8}{2} Turns OFF message transfer
{4} New message playback {8}{3} Turns ON pager call
{5} All message playback {8}{4} Turns OFF pager call
{6} Room monitor {#} Skips the greeting message
FPG379-PFQX2138ZA-en.book Page 63 Wednesday, January 12, 2005 4:49 PM