Filter
Top Products
8. Programmable Features
77
{0}{6}{1} Changing the ring setting in
TAM/FAX mode
To change the number of rings before the unit
answers a call in TAM/FAX mode. See page 53
for details.
{2} “2” (default)
{3} “3”
{4} “4”
{5} “5”
{6} “6”
{7} “7”
{0} “Toll saver”
Note:
L You can also program this feature with the
base unit (feature #06 on page 69).
{0}{6}{2} Changing the maximum
recording time for incoming messages
{1} “1min”: 1 minute
{2} “2min”: 2 minutes
{3} “3min” (default): 3 minutes
{0} “Greeting only”: Only plays the greeting
message.
Note:
L If you select “Greeting only”, the unit will
answer a call with the greeting message, and
then hang up. The unit will not record any
incoming messages.
L You can also program this feature with the
base unit (feature #10 on page 69).
{0}{6}{3} Setting remote operation code
1. Press {MENU}.
2. Press {0}{6}{3}.
L “Remote code” will be displayed.
3. Enter a remote code using a 2-digit number
(00–99).
L The default setting is “11”.
4. Press {Save} (soft key 1).
5. Press {OFF}.
Note:
L You can also program this feature with the
base unit (feature #11 on page 69).
{0}{8} Changing the display language
You can select either “English” (default) or
“Español” for the display language.
{1} “English” (default)
{2} “Español”
{0}{#} Setting the message alert
You can select whether or not the
Ringer/Message alert indicator on the handset
will flash when new messages have been
recorded (page 60).
{1} “On”: The Ringer/Message alert indicator
will flash.
{0} “Off” (default): Deactivates this feature.
Note:
L The Ringer/Message alert indicator will not
flash for new messages while the handset is
in use.
L The Ringer/Message alert indicator acts as a
ringer indicator and as a message alert
indicator. This indicator will flash rapidly
when a call is received whether this feature is
ON or OFF.
L Battery life may be shortened when using this
feature (page 20).
FPG379-PFQX2138ZA-en.book Page 77 Wednesday, January 12, 2005 4:49 PM