Filter
Top Products
8. Programmable Features
74
Features (Handset)
8.5 Handset programming
Important information
L Make sure the handset and base unit are
not being used.
1 Press {MENU}.
2 Press the code number ({0} to {9} and {#}).
3 Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {Save} (soft key 1).
5 Press {OFF}.
Note:
L To exit programming, press {OFF} at any
time.
8.6 Direct command chart for handset
For more details on the features, see page 76 to page 77.
{OFF}
{MENU}
1
Feature Feature code Direct command Page
Ringer volume {1}{1}{1}: Low {2}: Medium
{3}: High (default) {0}: Off
page 27
Ringer tone {1}{2}{1}: “Tone 1” (default)
{2}: “Tone 2” {3}: “Tone 3”
{4}: “Melody 1” {5}: “Melody 2”
{6}: “Melody 3” {7}: “Melody 4”
page 76
Message play {2} ---------- page 61
Voice enhancer {5}{1}: “On” {0}: “Off” (default) page 32
LCD contrast {0}{1}{1}-{6}: Level 1-6 page 76
Key tone {0}{2}{1}: “On” (default) {0}: “Off” page 76
Auto talk {0}{3}{1}: “On” {0}: “Off” (default) page 76
Caller ID number auto edit {0}{4}{1}: “On” (default) {0}: “Off” page 42
Set dial mode {0}{5}{1}{1}: “Pulse” {2}: “Tone” (default) page 76
Set flash time {0}{5}{2}{1}: “700ms” (default)
{2}: “600ms” {3}: “400ms”
{4}: “300ms”
{5}: “250ms” {6}: “110ms”
{7}: “100ms” {8}: “90ms”
page 76
Set line mode {0}{5}{3}{1}: “A” {2}: “B” (default) page 76
FPG379-PFQX2138ZA-en.book Page 74 Wednesday, January 12, 2005 4:49 PM