Filter
Top Products
3. Telephone
45
Other Fea tures
3.13 Intercom
Intercom calls can be made between the
handset and the base unit.
L Keep the front cover page open for button
locations.
3.13.1 Making intercom calls
With the handset
1 Press {HOLD/INTERCOM}.
L The base unit will beep for 1 minute.
L To stop paging, press {OFF}.
2 When the paged party answers, talk into the
handset.
L You can switch to the speaker by pressing
{SP-PHONE}. To switch back to the
receiver, press {TALK}.
3 To end the intercom, press {OFF}.
With the base unit
You can also locate a misplaced handset by
paging it (Handset locator).
1 Press {LOCATOR/INTERCOM}.
L The handset will beep for 1 minute.
L To stop paging, press {SP-PHONE} or
{LOCATOR/INTERCOM}.
2 When the paged party answers, talk into
{MIC}.
3 To end the intercom, press {SP-PHONE} or
{LOCATOR/INTERCOM}.
3.13.2 Answering intercom calls
With the handset
When the handset is being paged, it will ring and
the Ringer/Message alert indicator will flash
rapidly.
1 Press {TALK}, {SP-PHONE} or
{HOLD/INTERCOM} to answer the page.
L You can also answer the page by
pressing any button except {v}, {e} or
{OFF}.
2 To end the intercom, press {OFF}.
With the base unit
When the base unit is being paged, it will beep.
1 Press {SP-PHONE} or
{LOCATOR/INTERCOM} to answer the
page.
2 To end the intercom, press {SP-PHONE} or
{LOCATOR/INTERCOM}.
Note:
L When the ringer volume is OFF (page 27,
28), the handset and the base unit will ring at
the low level when paged.
L If you have difficulty hearing the other party,
decrease the speaker volume.
3.14 Transferring a call
A telephone call can be transferred between the
base unit and the handset using the intercom
feature.
L Keep the front cover page open for button
locations.
3.14.1 To transfer a call from the
handset
1 Handset:
During a phone call, press
{HOLD/INTERCOM} 2 times to page the
base unit.
L The call will be put on hold.
L If the paged party does not answer, press
{TALK} or {SP-PHONE} to return to the
phone call.
L If you do not wish to announce the
transfer, press {OFF} to complete the
transfer.
2 Base unit:
Press {SP-PHONE} or
{LOCATOR/INTERCOM} to answer the
page.
L If the paging party hangs up before
you answer the page, “INCOMING
CALL” will be displayed. Press {SP-
PHONE} to take the transferred call.
3 Handset:
After the paged party answers, “Intercom
hold” is displayed.
To complete the transfer, press {OFF}.
3.14.2 To transfer a call from the
base unit
1 Base unit:
During a phone call, press
{LOCATOR/INTERCOM} to page the
handset.
L The call will be put on hold.
L If the paged party does not answer, press
{LOCATOR/INTERCOM}, then {SP-
PHONE} to return to the outside call.
FPG379-PFQX2138ZA-en.book Page 45 Wednesday, January 12, 2005 4:49 PM