22
Using Settings... dialog
The “Settings...” dialog allows you to adjust and save all quality selections, color modes and halftone settings
of the driver under a specific name. In this way, you can restore a special setting you need by selecting
another User Setting in the Main window.
Click on the Settings... tab to display the following window.
A Customizing user setting
When you change an adjustment, like Print Quality, Color, Halftone, or Intensity Control, the User Setting
item changes to ‘User Defined’. If you need to use this setting again, save it by simply typing over the
words ‘User Defined’ with a new name of your choice.
1
Make your changes to Print Quality, Color,
Halftoning, or Intensity Control.
¡
The User Setting item changes to ‘User Defined’.
2
Type over the words ‘User Defined’ with a new
name of your choice.
Important:
¡When you put a ‘*’ at the end of the name, you are defining a permanent User Setting, which cannot be
deleted. The predefined settings have a ‘*’ at the end and may not be deleted.
B Removing defined user settings
1
Select the User Setting you want to delete.
2
Click Delete.
¡
The User Setting will be removed from the list.
User Settings with a ‘*’ at the end cannot be
removed, even if they are user-defined.
F
A
B
D
E
C
Settings... tab