Filter
Top Products
58
5
Unwrap the new ink cartridge and remove the
protective cap.
6
Install the new ink cartridge by
A Sliding it into the empty slot on the print cartridge,
and
B Pressing firmly on the tab on the top of the ink
cartridge until the cartridge snaps into place.
¡Make sure each ink cartridge is in its proper slot; the
color ink cartridge (KX-FA152) on the left and the
black ink cartridge (KX-FA153) on the right.
Caution:
¡Do not move the mechanism that houses the print
cartridge. Attempting to move the print cartridge
holder will damage the unit.
7
Close the lid securely by pushing down on both sides.
Cleaning the print head
The unit is equipped with a print head cleaning function to ensure consistent high quality printing.
1
Make sure the unit is turned on.
2
Open the station key panel and press (CLEANING)
until a beep tone is heard.
¡If the unit is in the printer mode, the ON LINE light
will flash for several seconds while the print head is
being cleaned.
¡After cleaning, a beep tone is heard.
Note:
¡Perform the head cleaning only when there is a print
quality problem. Unnecessary and repetitious head
cleaning will waste ink.
¡If you execute the head cleaning while paper is manually
loaded, the unit will eject the paper and then perform the
head cleaning.
2
1
(CLEANING)
Station key
panel
Protective cap
Tab