9
Setting up the Unit
for Printing
Setting the paper thickness lever
Use the paper thickness lever to adjust the distance between the print head and the paper to accommodate
different paper thicknesses.
1
Slide the front lid open lever towards you to
open the front lid.
2
Set the paper thickness lever to the correct
position.
¡For printing on ink jet paper or plain paper
using a black print cartridge, set to the left
position.
¡For printing on any type of paper using the
color print cartridge, or printing on color ink
jet paper, ink jet glossy paper, ink jet
transparencies, or ink jet back print film, set
to the center position.
¡For printing on thick paper or envelopes, set
to the right position.
Paper thickness lever
Setting the paper selection lever
You must set the paper selection lever according to the paper you use.
Be sure to remove any paper from the paper tray before setting the paper selection lever.
¡For ink jet paper, plain paper, color ink jet
paper, ink jet transparencies, or ink jet back
print films, set this lever to the back position .
¡For envelopes, ink jet glossy paper, thick
paper, and manual feed, set this lever to the
front position.
Note:
¡Do not move this lever after loading paper in the paper tray.
¡This lever is different from a lever on a typewriter or dot matrix printer. You need not pull it forward to load
paper.
Paper selection
lever
Front
Back
Left
Center
Right
Front lid
open lever