Filter
Top Products
31
Using the Unit with
MS-DOS Applications
Changing settings for LQ emulation
The following list shows the settings you can customize and explains each one.
TEXT SCALE SET: You can select the number of lines (62 or 66 lines) that can fit on a piece of
paper. If the software application you are using assumes that each piece of
paper equals 66 lines, select ENABLE. For other applications, select
DISABLE.
CHARACTER SETTING: You can choose from Italic Character Set and Graphic Character Set. The
setting you choose depends on the characters you want to print. For more
details on character sets, see page 42.
INT’L CHARACTER SET: You can choose from eight different language sets: USA, UK, Germany,
France, Denmark, Sweden, Italy, and Spain.
TYPEFACE SETTING: You can choose from eight different typefaces: Roman, Sans serif, Draft,
Courier, Prestige, Script, Orator and Orator-S.
AUTO EMULATION SWITCH: When Enable is selected, the unit can switch to the BJ mode when BJ mode
is detected.
SMOOTHING: When Enable is selected, the unit can refine your printout at 720 (horizontal)
by 360 (vertical) dots per inch by smoothing jagged edges. The smoothing
mode is used with the black print cartridge only.
Follow this procedure to customize the unit when using LQ emulation.
1
Press (MENU) until the following is displayed.
2
Press (START/SET).
3
Press (‹) or (›) to select LQ emulation.
4
Press (START/SET).
5
Press (‹) or (›) until the desired function is
displayed.
6
Press (START/SET).
7
Press (‹) or (›) to select the desired setting.
8
Press (START/SET) to store the setting.
¡To set other items, repeat steps 5 through 8.
9
Press (MENU).
PRESS[ÿŸ]&[SET]
EMU.MODE=LQ[ÿŸ]
EMU.MODE=LQ[ÿŸ]
PRINTER SET UP
2
4
3
5 6
7 8
0
9
1
(MENU)
(START/SET)
(‹)/(›)