Filter
Top Products
39
Using the Unit with
MS-DOS Applications
Function
Set relative print position
Set vertical tabs in channels
Set 15 cpi mode
Select typeface; n=type face
Set left margin; n=left margin position in characters
Set/cancel proportional space mode; n=0 (Cancel
proportional space mode), 1 (Start proportional space
mode)
Select character style; n=character style
Select color; n=color
Select character set; n=character code table
Set/cancel double-high mode; n=0 (Cancel double-high
mode), 1 (Start double-high mode)
Set/cancel draft font mode; n=0 (Set draft font printing), 1
(Cancel draft font printing)
ASCII
(ESC) \
(ESC) b
(ESC) g
(ESC) k n
(ESC) l n
(ESC) p n
(ESC) q n
(ESC) r n
(ESC) t n
(ESC) w n
(ESC) x n
Decimal
27 92
27 98
27 103
27 107 n
27 108 n
27 112 n
27 113 n
27 114 n
27 116 n
27 119 n
27 120 n
Hexadecimal
1B 5C
1B 62
1B 67
1B 6B n
1B 6C n
1B 70 n
1B 71 n
1B 72 n
1B 74 n
1B 77 n
1B 78 n
BJ mode command summaries
Use the control codes listed in the following tables when the unit is set for BJ emulation.
Note:
¡Because of hardware differences, the reverse feed code (ESC ]) and the printer deselect code (DC3) are not
supported. Also, the styles of block graphics characters at 12 cpi are different from normal IBM Proprinter
X24E printing.
Basic control codes (BJ)
Function
Backspace one character
Horizontal tab control; move to next tab
Perform line feed
Vertical tab control; move to next tab
Perform form feed
Perform carriage return
Set double-wide mode by line
Set condensed mode (17 cpi)
Select printer
Set 10 cpi mode
Cancel double-wide mode
Cancel data
ASCII
(BS)
(HT)
(LF)
(VT)
(FF)
(CR)
(SO)
(SI)
(DC1)
(DC2)
(DC4)
(CAN)
Decimal
8
9
10
11
12
13
14
15
17
18
20
24
Hexadecimal
08
09
0A
0B
0C
0D
0E
0F
11
12
14
18