Filter
Top Products
ENGLISH-15
Preparation
*When in computer operating mode, this button on the remote control unit
functions differently. (page 33)
*Arrow (
FGI
and
H
) buttons (page 37)
These buttons are used to select and adjust items in the on-screen menus.
*When in computer operating mode, these buttons on the remote control
unit function differently. (page 33)
+MENU button (pages 34 and 37)
This button is used to display the menu screens. When a menu screen is
being displayed, this button can be used to return to a previous screen or
to clear the screen.
,ZOOM +/- buttons (page 25)
These buttons are used to adjust the size of the projected image.
-FOCUS +/- buttons (page 25)
These buttons are used to adjust the focus of the projected image.
.AUTO SETUP button (pages 25 and 28)
If this button is pressed while a picture is being projected, the projection settings
will be adjusted automatically in accordance with the signal being input.
/POWER button (pages 24 and 26)
These buttons are used to turn the power on and off when MAIN POWER
is turned on.
(For the remote control unit, the “ ” button is for turning on the power and
the “ ” button is for turning off the power.)
0Laser emitter (page 32)
1Infrared emitter (page 22)
2Click button (page 33)
This button can be used when the operating mode select switch is moved
to the left (Computer).
3STD (standard) button (page 38)
This button is used to reset the projector adjustment values to the factory
default settings.
4FUNC1 button (pages 43, 46 and 49)
This button can be used for 1) switching on and off the sound volume and
2) entering into the keystone distortion correction mode. Adjust “FUNC1”
in the “OPTION” menu to select which you wish to use.
5LENS button (page 31)
This button is used to display the zoom and focus adjustment screen.
6Operation indicator (page 32)
This indicator illuminates while a laser beam is being emitted (while the LASER
button is being pressed). It flashes when any other buttons are being pressed.
7LASER button (page 32)
A beam of laser light is emitted while this button is being pressed. This
laser beam can be used as a pointer to point to something on the screen.
8FREEZE button (page 29)
This button is used to momentarily freeze projection so that a still picture is displayed.
9D.ZOOM +/- buttons (page 30)
These buttons are used to enlarge the projected image.
(continued on next page)