Filter
Top Products
40-ENGLISH
CONTRAST
This adjusts the contrast of the
picture. (Adjust the “BRIGHT”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright: I button
The picture is dark: H button
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
COLOR
(S-VIDEO/VIDEO/YPBPR
only)
The color is too deep: I button
The color is too pale: H button
TINT
(NTSC/NTSC 4.43/YPBPR only)
This adjusts the flesh tones in the
picture.
The flesh tones are greenish:
I button
The flesh tones are reddish:
H button
SHARPNESS
To soften the picture details:
I button
To sharpen the picture details:
H button
COLOR TEMP.
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
Noise Reduction (NR)
(S-VIDEO/VIDEO/480i and 576i
YPBPR only)
If the signal is of such poor quality
that picture interference appears,
you can suppress this interference
by adjusting the “NR” (Noise
Reduction).
To turn off the “NR” feature (set the
value to “0”):
I button
To strengthen the effect:
H button
WHITE BALANCE R/G/B
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colorised.
To make the selected color lighter
:
I button
To make the selected color stronger
:
H button
STANDARD
HIGH
LOW