Filter
Top Products
ENGLISH-17
Preparation
&RGB2 IN/RGB OUT connector (pages 20, 21 and 47)
This connector is used to input or output RGB signals and YPBPR signals.
Adjust “RGB2 SELECT” in the “OPTION” menu to select whether you want
input or output with this connector.
'DVI-D IN connector (page 21)
This connector is used to input DVI-D signals.
(AUDIO OUT connector (pages 20 and 21)
This connector is used to output the audio signals which are input to the
projector. If audio equipment is connected to this connector, no sound will
be output from the built-in speakers.
)S-VIDEO IN connector (pages 20 and 45)
This connector is used to input signals from a S-VIDEO-compatible
equipment such as a video deck. The connector is S1 signal compatible,
and it automatically switches between 16:9 and 4:3 aspect ratios in
accordance with the type of signal being input.
*AUDIO IN L-R connectors (for S-VIDEO/VIDEO) (page 20)
Only one system is provided, so connect the appropriate connectors when
using S-VIDEO or VIDEO.
+REMOTE connector (page 71)
This connector is used to control the projector from the remote control set
up in wired mode.
,RGB3 IN connector (pages 20 and 21)
This connector is used to input RGB signals and YPBPR signals.
-RGB AUDIO IN connector (pages 20 and 21)
Only one system is provided, so connect the appropriate connector when
using RGB1, RGB2 or RGB3.
.VIDEO IN connector (page 20)
This connector is used to input video signals from a video equipment such
as a video deck.