Filter
Top Products
ENGLISH-53
Adjustments and settings
LOGO DISPLAY
A logo can be displayed before
projection.
ON
“LOGO DISPLAY” is enabled.
OFF
“LOGO DISPLAY” is disabled.
LOGO CLEAR
Captured logo data can be cleared.
Press the ENTER button to display
the confirmation screen, and then
select “OK”.
LOGO CAPTURE
A logo can be captured from the
picture being projected. Press the
ENTER button to display the
capture adjustment screen.
#Press the FGIand H buttons
to move the capturing frame to
the area you want to capture.
$Press the ENTER button.
CThe letters “CAPTURE ...” and
the progress status will be
displayed while logo capture is
being carried out.
POSITION:[{ } ^ @]
CAPTURE:[ENTER]
CANCEL:[MENU]
Capturing frame
NOTE:
BThe size of the capturing frame
varies depending on the
signals being input.
BFine images such as landscapes
may be unable to be captured.
BOnly RGB signals can be
captured. (Except 480i, 576i,
480p, 576p, 1 080/60i,
1 080/50i and 720/60p. Refer
to page 70 for details.)
BImages with 512 x 384 pixels
can be captured.
BIt is recommended that you input
XGA signals, and set
“KEYSTONE” to “0” when
carrying out “LOGO CAPTURE”.
NOTE:
BThe letters which cannot be
input will be displayed in gray,
and cannot be selected in
“CHANGE TEXT”.