Filter
Top Products
52-ENGLISH
TEXT DISPLAY
You can set text to be displayed at
the bottom of the projected image at
all times.
ON
“TEXT DISPLAY” is enabled.
OFF
“TEXT DISPLAY” is disabled.
CHANGE TEXT
The text which is displayed when
“TEXT DISPLAY” is set to “ON” can
be changed.
Press the ENTER button to display
the “CHANGE TEXT” screen.
#Press the F, G, I and H
buttons to select the letters, then
press the ENTER button.
(You can enter 20 letters
continuously.)
<Editing Items>
←
Moves cursor to left.
→
Moves cursor to right.
DELETE
Deletes a letter on the cursor.
ALL DELETE
Deletes all the letters.
$Press the F, G, I and H
buttons to select “OK”, then press
the ENTER button.
CSelect “CANCEL” to cancel the
change.
NOTE:
BThe entered password will
appear as . It will not be
displayed on the screen.
BIf you enter the wrong
password, the letters
“PASSWORD” and “NEW” will
become red. Enter the correct
password again.
'
Cursor
Editing items
Above: Setting before change
Below: Setting after change