Filter
Top Products
64-ENGLISH
Replacing the projection lens
By replacing the projection lens with a lens that is sold separately, you can
change the projection distance.
#Turn the projection lens
anticlockwise until it stops.
$While pressing the lens
release button, turn the
projection lens anticlockwise
again.
%Remove the projection lens.
#Insert the other projection
lens (sold separately) as far
as it will go, while matching
the projection to the groove.
$Turn the projection lens
clockwise until a click is
heard.
Signal connection
Projection
Groove
Removing the lens
Installing the lens
NOTE:
BBe sure to turn off the power before replacing the projection lens.
BDo not touch the signal connection. If any dust or lint gets onto the
signal connection, the electrical contact may become poor.
BDo not touch the surface of the lens with your bare hands.
BStore the replaced projection lens away carefully to avoid subjecting it
to excessive vibration or shock.
BBe sure to adjust “LENS SELECT” in the “LENS” menu when replacing
the projection lens. (page 50)