Filter
Top Products
sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictures to be
reproduced more faithfully, make
the following settings.
#Press the
F
or
G
button to
select “PICTURE MODE”, and
then press the
I
or
H
button
to select “NATURAL”.
$Press the
F
or
G
button to
select “COLOR TEMP.”, and
then press the
I
or
H
button
to select “STANDARD”.
%Press the STD (standard)
button on the remote control
unit.
&Press the F or G button to
select “LAMP POWER” in the
“OPTION” menu, and then
press the I or H button to
select “HIGH”.
ENGLISH-41
Adjustments and settings
NOTE:
BsRGB is only enabled when
RGB signals are being input.
TV-SYSTEM
(S-VIDEO/VIDEO only)
AUTO
NTSC
NTSC4.43
PAL
PAL-M
PAL-N
SECAM
Projecting sRGB-
compatible pictures
This should normally be set to
“AUTO”. If the signal is of such poor
quality that the correct format
cannot be automatically
distinguished, change the setting
manually to the required TV system.
NOTE:
BWhen set to “AUTO”, the
projector automatically
distinguishes between
NTSC/NTSC 4.43/PAL/PAL60/
PAL-M/PAL-N/SECAM signals.