Filter
Top Products
When one of the following message numbers appears on the display, the VTR is set to the auto OFF mode (stop) or its power is
forcibly turned off. Turn off the power, and then turn it back on. If the error persists after this, consult your dealer.
ERROR MESSAGES
69
Error messages
E-11
E-21
E-31
E-32
E-41
E-42
E-43
E-44
E-51
E-52
E-53
E-61
E-62
E-63
When the cassette was inserted, the reel motor locked up for about 2.5 seconds or
longer. When the cassette is ejected, the VTR is set to the auto OFF mode.
When the cassette was removed, the front loading motor locked up for about 4
seconds. When the cassette moves down again and the motor locks up again
even if an attempt is made to remove the cassette, the VTR is set to the auto OFF
mode if the cassette has moved down.
The loading motor locked up for about 4 seconds when the cassette was loaded. If
the motor locks up even when the cassette is unloaded and loaded again, the cas-
sette is ejected. The VTR is set to the auto OFF mode.
The motor locked up for about 4 seconds when the cassette was unloaded. The
VTR is set to the auto OFF mode.
The FG (rotational speed) signal is not output from the cylinder motor.
The PG (phase speed) signal is not output from the cylinder motor.
The cylinder motor speed is abnormally high.
The cylinder motor speed is abnormally low.
The FG (rotational speed) signal is not output from the capstan motor.
The capstan motor speed is abnormally high.
The capstan motor speed is abnormally low.
The supply reel motor has locked up.
The take-up reel motor has locked up.
The supply reel motor speed is abnormally high.
Error No. Details of error VTR operation
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP