Filter
Top Products
12
Getting Started
1Charge your Device
Plug the power adapter into an electrical wall outlet, and then connect to your device
to fully charge the battery before use (approx. 4 hours).
The battery does not charge via the USB cable.
While charging, the battery icon displays as:
.
When fully charged, the battery icon displays as:
.
You can use the device while the battery is charging.
2Turn Device On
Press the power button approximately 3 seconds until you see the boot up message.
3Select Language
Tap next to the desired language. (English only available; more languages
will be available in future firmware updates.)
Tap Save.
4Wi-Fi Network Setup
The
pandigital novel
automatically scans and
lists local Wi-Fi Networks found. A
indicates secure
networks that require login name/password to connect.
Tap the desired network to which you want to connect.
If secure network, enter the network Password, and
then tap
Connect.
When connected, tap to continue.
If your Wi-Fi network broadcast is set as hidden, tap
Add Network to enter the network name and password,
and then tap Connect.
Next