Paradise P300 Modem User Manual


 
OFFSET QPSK (OQPSK) PRIMER ............................................ 66
6.6.11 Change, Tx/Rx, Modulator, FEC Menu .................................. 66
6.6.12 Change, Tx/Rx, Mod/Demod, REED-SOLOMON Menu .................... 68
INTRODUCTION TO REED-SOLOMON ........................................ 68
6.6.13 Change, Tx/Rx, Mod/Demod, SCRAMBLER Menu ........................ 69
6.6.14 Change, Tx, Modulator, CARRIER Menu ................................ 71
6.6.15 Change, Tx, Modulator, POWER LEVEL Menu ........................... 71
6.6.16 Change, Tx/Rx, Modulator, SPECTRUM INVERT Menu ................... 72
NOTE ON BPSK SPECTRUM INVERSION ...................................... 72
6.6.17 Change, Tx, Modulator, AUPC (Software >=V2.12) ....................... 72
6.6.18 Change, Tx, Modulator, AUPC, MODE Menu ............................ 73
6.6.19 Change, Tx, Modulator, AUPC, MAX Menu .............................. 73
6.6.20 Change, Tx, Modulator, AUPC, MIN Menu .............................. 74
6.6.21 Change, Tx, Modulator, AUPC, SLEW RATE Menu ....................... 74
6.6.22 Change, Tx, Modulator, AUPC, TARGET EB/NO Menu .................... 74
6.6.23 Change, Tx, Modulator, AUPC, TOLERANCE Menu ...................... 74
6.6.24 Change, Tx, Modulator, AUPC, CARRIER LOST ACTION Menu ............ 75
6.6.25 Change, Tx/Rx, ESC/AUX/BA Menu ................................... 76
6.6.26 Change, Tx/Rx, ESC/Aux/BA, DEFINE (IDR) Menu ....................... 77
6.6.27 Change, Tx/Rx, ESC/Aux/BA, DEFINE (IBS) Menu ........................ 78
6.6.28 Custom IBS Overhead Allocation ...................................... 80
6.6.29 Change, Tx/Rx, ESC/Aux/BA, ASYNC ESC Menu ......................... 81
6.6.30 Change, Tx/Rx, ESC/Aux/BA, Config Async, BAUD RATE Menu ............. 82
6.6.31 Change, Tx/Rx, ESC/Aux/BA, Config Async, FORMAT Menu ............... 82
6.6.32 Change, Tx/Rx, ESC/Aux/BA, Config Async, SET AS REM M&C ............. 82
6.6.33 Change, Tx/Rx, ESC/Aux/BA, INTERFACES Menu ....................... 83
6.6.34 Change, Tx/Rx, ESC/Aux/BA, AUDIO LEVELS Menu ...................... 84
6.6.35 Change, Tx/Rx, ESC/Aux/BA, BACKWARD ALARMS Menu ................ 85
6.7 CHANGE, RX MENU ........................................................ 86
NOTE ON RX=TX FUNCTION ................................................ 86
6.7.1 Change, Rx, SERVICE Menu ............................................ 87
6.7.2 Change, Rx, BASEBAND Menu .......................................... 87
6.7.3 Change, Rx, BUFFER / CLOCKING Menu .................................. 89
6.7.4 Change, Rx, Buffer / Clocking, STATION CLOCK Menu ....................... 89
6.7.5 Change, Rx, Buffer / Clocking, RX CLOCK Menu ............................ 90
6.7.6 Change, Rx, Buffer / Clocking, BUFFER SIZE Menu .......................... 92
6.7.7 Change, Rx, DEMOD’ Menu ............................................. 93
6.7.8 Change, Rx, Demod’, IF FREQUENCY Menu ............................... 93
6.7.9 Change, Rx, Demod’, MODULATION Menu ................................. 93
6.7.10 Change, Rx, Demod’ FEC Menu ...................................... 93
6.7.11 Change, Rx, Demod’ REED-SOLOMON Menu ........................... 93
6.7.12 Change, Rx, Demod’ SCRAMBLER Menu .............................. 93
6.7.13 Change, Rx, Demod’ SPECTRUM INVERT Menu ........................ 93
6.7.14 Change, Rx, Demod’ SWEEP Menu ................................... 94
6.7.15 Change, Rx, Demod’ AUPC Menu ..................................... 95
6.7.16 Change, Rx, ESC/AUX/BA Menu ...................................... 95
6.7.17 Change, Rx, RX=TX Menu ........................................... 95
6.8 CHANGE, TERR-INTFC MENU ............................................... 96
6.8.1 Change, Terr-intfc, ELECTRICAL ......................................... 96
6.8.2 Change, Terr-intfc, CONTROL LINES ..................................... 98
6.8.3 Change, Terr-intfc, CARD SPECIFIC ...................................... 98
6.9 CHANGE, REM-M&C MENU.................................................. 99
6.9.1 Local Control TAKE AWAY / GIVE AWAY Selection .......................... 99
6.9.2 Change, Rem-M&C, CONFIGURE Menu .................................. 100
6.10 CHANGE, USER-OPT MENU ................................................ 101
6.10.1 Change, User-Opt, THRESHOLDS Menu .............................. 101
6.10.2 Change, User-Opt, OPERATION Menu ................................ 101
6.10.3 Change, User-Opt, Operation, ACTIONS Menu .........................102