Filter
Top Products
P300H P300 Series Modem Installation and Operating Handbook Page 93
Demod: 1:Freq 2:Mod’n 3:FEC
4:RS 5:Scr 6:Spect Inv 7:Sweep 8:AUPC
Change, Rx, Demod Menu (Rx=Tx not active)
Demod: 1:Freq 2:Sweep 3:AUPC
(most of Rx follows Tx as Rx=Tx active)
Change, Rx, Demod Menu (Rx=Tx Active)
6.7.7 Change, Rx, DEMOD’ Menu
The options available on this menu change if the Rx=Tx function (on the Change, Rx Menu) is active.
Tx=Rx Not active
Rx=Tx Active
If the Rx=Tx function is active, only those parameters which vary between Rx & Tx are displayed, the screen
appears as follows:
Each of this is now discussed in turn, referring back to the Tx path screens where operation is identical.
6.7.8 Change, Rx, Demod’, IF FREQUENCY Menu
See Change, Tx/Rx, Modulator, IF Frequency Menu on page 65
6.7.9 Change, Rx, Demod’, MODULATION Menu
See Change, Tx/Rx, Modulator, Modulation Menu on page 65
6.7.10 Change, Rx, Demod’ FEC Menu
See Change, Tx/Rx, Modulator, FEC Menu on page 66
6.7.11 Change, Rx, Demod’ REED-SOLOMON Menu
See Change, Tx/Rx, Modulator, RS Menu on page 68
6.7.12 Change, Rx, Demod’ SCRAMBLER Menu
See Change, Tx/Rx, Modulator, Scrambler Menu on page 69
6.7.13 Change, Rx, Demod’ SPECTRUM INVERT Menu
See Change, Tx/Rx, Modulator, Spectrum Invert Menu on page 72