Filter
Top Products
Tx: 68.5734M 64k Rx: 73.4256M 64k
Carr:On, Eb/No:16.3dB Local
Tx: 68.5734M 64k Rx: 73.4256M 64k
Carr:On, Eb/No:Unlocked ALARM!
Tx path OK for 3.7days
Rx path OK for 2.1days BER < 1E12
Tx Fault: No clock from interface
Rx Fault: Demod unlocked at 73.4256MHz
Rx path OK since: 15:13:44 on 05/07/97
User BER: 1.0e-12, Buffer +00 -00 53%
Rx Fault: Demod unlocked at
73.4256MHz with sweep width of 10KHz
Tx path OK since 17:10:25 on 05/07/97 Tx Fault: No input clock from
interface (line TT)
Demod: Eb/No:16.3dB User BER:1.0e-12
Offset: +3.4KHz Carrier Level: -38dBm
Demod: Unlocked
STATUS
RX OK
TX OK
TEST
STANDBY
DATACOM
PARADISE
Tx path OK for 3.7days
Rx path OK for 2.1days BER < 1E-12
0
1 2
3
4
5 6
7
9
8
YES /
ENTER
NO /
PREV
MAIN
P300 Series
Satellite Modem
Status Display (no faults)
Status Display (Tx & Rx faults)
Configuration
Summary
Traffic Status
Summary
Rx Status
(detailed)
Tx Status
(detailed)
Demod status
(detailed)
U
ser selection of
User selection of
d
efault screen when
default screen when
‘
Status‘ selected
‘Status‘ selected
O
ther status screens
Other status screens
b
y pressing Up or Down
by pressing Up or Down
f
rom 1st ‘Status‘ screen
from 1st ‘Status‘ screen
P300H P300 Series Modem Installation and Operating Handbook Page 49
6.3 Status SCREEN DISPLAY
When Status is selected the LCD switches to a display of the current modem status. This is a series of
screens which are accessible from each other with the Up and Down keys. The available status screens
are summarised in the following diagram:
The operator has the option to display either the Configuration Summary Screen (shown first above) or
the Traffic Status Summary Screen (shown second above) when Status is selected from the main menu.
The selection between screens is made under Change, User-Opt, Display. These screens are now each
discussed in turn: