Filter
Top Products
2. Installation
4929-A2-GN20-00 March 2005
2-5
Installing the DSLAM Into a Rack
Use:
#10-32 mounting screws for rails with threaded screw holes
#12-24 mounting screws and self-retaining nuts for rails with unthreaded
screw holes
Procedure
To install the DSLAM into a rack:
1. Determine where in the rack you will mount the DSLAM. If your rack does not
have threaded screw holes, slip self-retaining nuts onto the rails where the
DSLAM will be fastened.
2. Place the unit so that the brackets rest against the front of the rails. Insert
screws in the bottom screw positions and hand-tighten them.
02-17070