Filter
Top Products
5. Configuration Using the NMS
4929-A2-GN20-00 March 2005
5-7
SNMP Configuration
Use the SNMP Configuration screen to enable traps and establish trap managers..
Procedure
To configure SNMP parameters:
1. From the home screen, click on the SNMP Config button. The SNMP
Configuration screen appears.
2. Select or enter the following parameters:
3. Click on Submit.
Parameter Description
SNMP Notification IP Specify the IP addresses of hosts that are to receive
trap notifications.
SNMP Traps Click in the check boxes to enable or disable SNMP
traps:
snmpAuthentication
snmpEnvironment
snmpColdStart
snmpModule/Port