Filter
Top Products
5. Configuration Using the NMS
4929-A2-GN20-00 March 2005
5-21
Circuit Configuration
Use the Circuit Configuration screen to set the parameters for a single port.
Procedure
To configure circuit parameters:
1. From the home screen, click on one of the 24 DSL port LEDs. Alternatively,
click on the Circuit Summary button, then click on a port number on the left
side of the Circuit Summary listing. The Circuit Configuration screen appears.
2. Select or enter the following parameters:
Parameter Description
Port Select a port from the drop-down list.
Port Mode Setting Specify a port mode:
Fixed – The upstream and downstream rates are
fixed.
Adaptive – The ports will automatically train up to
the best possible speed supported by the DSLAM,
the modem at the remote end, and the copper
cable pair connecting the two.
Fixed Adaptive – The ports will automatically train
up to the best possible speed, subject to a
user-specified maximum upstream and
downstream bandwidth.