Filter
Top Products
5. Configuration Using the NMS
5-24 March 2005 4929-A2-GN20-00
3. Click on Submit.
Allow Tag/Untag on Ingress
Pkt.
Specify tag or untag. Tag indicates that ingress
packets already matched to the Diffserv Rule must
have a VLAN tag to be further considered; packets
without a VLAN tag will be dropped. Untag indicates
that ingress packets already matched to the Diffserv
Rule cannot have a VLAN tag to be further
considered; packets with a VLAN tag will be dropped.
VLAN ID Range Specify a VLAN ID range. For each rule, if you
selected Tag for Allow Tag/Untag, the VLAN field
should specify either an acceptable single VLAN, or
an acceptable VLAN Range, for VLAN tags on ingress
packets. If you selected Untag, the VLAN field should
specify a single VLAN only if you intend to have a
VLAN tag added to packets; if you do not intend to
have a VLAN tag added to packets, the VLAN field
should be left at the 0 - 0 default.
Add VLAN to Ingress Pkt. Specify whether the VLAN ID should be added to
ingress packets.
Priority Specify the priority to be used when adding a
configured VLAN ID to a packet.
Fixed/Max Specify the handling of VLAN priority (used only if the
received packet is already tagged):
Fixed – The packet's original priority will
automatically be replaced with the Priority
specified above,
Max – The packet's original priority will be replaced
with the configured Priority only if the packet's
original priority is greater than the configured
Priority.
Ingress Limit Specify the ingress limit in kbps for packets matching
this rule.
Egress Limit Specify the egress limit in kbps for packets matching
this rule.
Parameter Description