Filter
Top Products
5. Configuration Using the NMS
4929-A2-GN20-00 March 2005
5-11
Global DSCP Rules
Procedure
To configure DSCP rules:
1. Click on the Global DSCP Rules tab. The Global DSCP Rules screen appears.
2. In the Add Ports drop-down list, select All or a group of ports. To select
multiple ports, hold the Ctrl key while clicking on your selections.
3. Select or enter the following parameters:
Parameter Description
Reset the DSCP Range
rules to default parameters
Click in this box to reset DSCP Range rules when the
Submit button is clicked on.
Global Configuration
Diffserv Rule
Specify Add, Delete, or No Set to add a rule, delete a
rule, or perform no action when the Submit button is
clicked on.
Activate Specify whether the rule you are adding is active.
DS Value Specify the Differentiated Services value. The DS
Value of a packet is a hexadecimal value calculated
from the upper six bits of an eight-bit field in the
packet's IP header.