Filter
Top Products
Using the ATI
2-4
7610-A2-GB20-10
November 1997
Screen Work Areas
There are two user work areas:
H Screen area – Provides the menu path, access level, menus, and input fields
above the dotted line. Refer to
Entering Device and System Information
in
Chapter 3.
The menu path appears as the first line on the screen. In this manual, the
menu path is presented as a menu selection sequence with the names of the
screens:
Main Menu
→
Configuration
→
Load Configuration From
→
Edit
→
User Interface
→
Terminal Port
H Screen function key area – Provides functions available below the dotted
line based upon screen selection and access level. Refer to the
Switching
Between Screen Work Areas
section.
main/configuration/edit/user/term
Device Name: Model: 7610
TERMINAL PORT OPTIONS
Data Rate (Kbps): 9.6
Character Length: 8
Parity: None
Stop Bits: 1
Monitor DTR: Enable
Login Required: Enable
Port Access Level: Level 1
Inactivity Timeout: Enable
Disconnect Time(minutes): 5
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave
Select: 2.4, 4.8, 9.6, 14.4, 19.2, 28.8, 38.4 No Signal
Menu Path
Screen
Function
Keys
Field Value
Choices
System
Messages
Input Fields