Filter
Top Products
Customizing the SNMP DSU
3-7
7610-A2-GB20-10
November 1997
Call Setup Screen
Use the Call Setup screen to:
H Initiate or disconnect an active call with an external device. External Device
Commands option must be set to AT or Other (not to Disable). Refer to
External Device Options, Table A-6.
H Display the phone number entered on the Call Directories screen.
To access the Call Setup screen, follow this menu selection sequence:
Main Menu
→
Control
→
Call Setup
main/control/setup
Device Name: Model: 7610
CALL SETUP
Directory: Primary
Phone Number: xxxxxxx
Dial
Disconnect
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
Select: Primary, Alternate
After completing call setup, the Management port can be used to send out ASCII
alarms and SNMP traps. The Alarm & Trap Dial-Out option must be enabled.
Refer to Alarms & Traps Options, Table A-8.