Filter
Top Products
5446 RTU Setup
C-2
8000-A2-GB20-50April 2000
98-16098a
Customer Premises (CP)
DSL/POTS
End-user
Systems
TST
DSL
ETHERNET
ALMPWR
TM
5446 RTU
Router
Default
Gateway
Hub Hub
Hub
End-user
Systems
120.26.7.1
120.26.7.2
120.26.7.3
120.26.7.100
120.26.7.200
130.26.7.1
130.26.7.2
130.26.7.3
140.26.7.1
140.26.7.2
140.26.7.3
End-user
Systems
IP Injection Type IP Address Network Mask Next Hop Router
Host 120.26.7.1 255.255.255.255 0.0.0.0
Host 120.26.7.2 255.255.255.255 0.0.0.0
Host 120.26.7.3 255.255.255.255 0.0.0.0
Host 130.26.7.1 255.255.255.255 120.26.7.100
Host 130.26.7.2 255.255.255.255 120.26.7.100
Host 130.26.7.3 255.255.255.255 120.26.7.100
Default Gateway 0.0.0.0 0.0.0.0 120.26.7.200
Figure C-1. IP Routing Table Example
NOTES:
— If a Default Gateway is defined, all packets not destined for an entry in
the IP Routing Table are sent to the Default Gateway. The Host devices
(end-user systems) attached to the default gateway are not configured in
the IP Routing Table (refer to IP addresses starting with 140 in
Figure C-1).
— The Host devices attached to the Next Hop Router are configured once in
the IP Routing Table with the Next Hop Router field (refer to IP addresses
starting with 130 in Figure C-1). The Host entry can also specify a remote
subnet, as needed.