Filter
Top Products
RADSL Card Configuration
3-17
8000-A2-GB20-50
April 2000
Table 3-3. Interfaces Options (3 of 3)
PPP A-C-D
Allows configuration of parameters for the PPP links used for the DSL connections. For
the 8540, there is no PPP submenu.
Interface Name – s1c, s1d, s1e, or s1f.
Restart Timer – 1–10000 in seconds (Default = 3).
Max Terminates – (Default = 2).
Max Configures – Maximum number of PPP links (Default = 10).
Max Naks – Maximum number of negative acknowledgments before PPP link goes
down (Default = 10).
Negotiate Options
The following values should not be changed:
MRU: No
ACCM: No
MAGIC: No
Quality: No
PFC: No
ACFC: No
Option Values
Local MRU (max) – 64–64000 bytes (Default = 1500)
ACCM: (Default = ffffffff)
LQR Freq: (Default = 10)
Link Options
Trace: On/Off/Raw/Decode (Default = Off). This field is for field service use only and
should not be turned on.
Echo Probe: Yes/No (Default = No)
Option Values
Echo Freq: (Default = 10)
Echo Policy: (Default = 5)
NOTE: While most of the fields on this screen are prepopulated, the values can be
changed.