Filter
Top Products
RADSL Card Configuration
3-14
8000-A2-GB20-50
April 2000
Table 3-2. Ports Options (3 of 3)
DSL Ports (DSL Parameters) (cont’d) A-B-B
Adaptive: Max Up Speed* –
1088/952/816/680/544/476/408/340/272/204/136/119/102/90.6/85/68/51/45.3/34/11.3
(Default = 1088 kbps). Enter the maximum upstream speed.
Thresholds for Trap Messages:
Adaptive: Min Dn Speed* – 7168/6272/5120/4480/3200/2688/2560/2240/1920/1600/
1280/1024/960/896/768/640/512/384/256 or d for Disable (Default = 256). Enter the
thresholds to cause traps to occur. This field will not display if Behavior is set to Fixed.
Adaptive: Min Up Speed* –
1088/952/816/680/544/476/408/340/272/204/136/119/102/90.6/85/68/51/45.3/34/11.3
or d for Disable (Default = 11.3). Enter the minimum upstream speed. This field will
not display if Behavior is set to Fixed.
Margin Threshold: – In Fixed mode, sends a trap message if the margin falls below
the selected Margin Offset value. Enter a value for the margin threshold trap (–5 dB to
+10 dB, or D to Disable). (Default = +3). In Adaptive mode, the value entered is
relative to the startup margin. For example, with a startup margin of +3 dB and a
threshold offset of +3 dB, the Low Margin Trap will be sent if the margin falls below
0 dB.
Link Down Ct: – Sends a trap message if the number of DSL link down events in
15 minutes exceeds the selected value. Enter a value for the Link Down Count Trap
(0 to 1000, or D to Disable). (Default = 0.)
NOTE: If you have made changes, exit the screen, then save. The changes are
then activated. You can only save changes on one port at a time.
* If you select a downstream speed of 2560 or higher, your upstream speed selection is
limited to 1088/952/680/408 kbps.