Filter
Top Products
RADSL Card Configuration
3-12
8000-A2-GB20-50
April 2000
DSL Configuration Ports Screens
Use the system information submenu of the Ports screens to display the DSL
Ports screen.
" Procedure
To configure DSL ports:
1. Follow this menu sequence:
Configuration →Ports (A-B)
2. The Ports menu appears. Enter the desired value on each selected screen
and field as shown in Table 3-2 and press Enter.
Table 3-2. Ports Options (1 of 3)
Ethernet Port A-B-A
Allows you to configure the Ethernet Port for full or half-duplex mode.
Port Name – Enter the port name (up to 7 characters).
Full Duplex – Enable for Full Duplex mode, Disable for half duplex mode
(Default = Disable).
Action – Edit/Reset. Select Reset to have changes become active.