Filter
Top Products
3. Cabling
3-8 July 2003 8620-A2-GN20-40
Connecting an MCP to an SNMP Management System
Procedure
To connect an MCP card to an SNMP management system or for Telnet access:
1. Plug the end of an 8-pin modular cable into LAN MCP jack of the SIM, which
corresponds to the MCP card in Slot 1 of the chassis.
2. Plug the other end of the cable into the 10/100 BaseT hub connector to the
SNMP management system network.
00-16909
To SNMP
Management System
ALARM
CLOCK
AB
SERIAL
SCM MCP
LAN
SCM MCP