Filter
Top Products
3. Cabling
8620-A2-GN20-40 July 2003
3-9
Connecting CO Alarm to the Alarm System
The following procedure is optional. Follow this procedure only if you want to
connect to a CO alarm system. See 8-Pin Modular Connector for Alarm Relay
Interface in Appendix A, Pinouts, for pin-out information.
Procedure
To connect the Hotwire 8620 GranDSLAM to a CO alarm system:
1. Plug the 8-pin modular cable into the ALARM connector on the front of the
8620 chassis.
2. Remove the modular plug connector at the end of the cable, strip the wires
and connect to the desired CO alarm system outputs.
00-16911
Alarm
ALARM
CLOCK
AB
SERIAL
SCM MCP
LAN
SCM MCP