Filter
Top Products
8620-A2-GN20-40 July 2003 iii
About This Guide
Document Purpose and Intended Audience
This guide is written for administrators and technicians who install devices at the
central office (CO) or at a Network Service Provider (NSP) location adjacent to the
CO. It should be used in conjunction with the appropriate Hotwire DSL Card
User’s Guide.
To install the customer premises portion of the Hotwire 8620 GranDSLAM, refer to
the appropriate Hotwire Remote Termination Unit (RTU) Customer Premises
Installation Instructions and Hotwire POTS Splitter Customer Premises Installation
Instructions.
New Features for this Release
This version of the Hotwire 8620 GranDSLAM Installation Guide includes the
Models 8412, 8413, 8414, 8416, and 8417 Shelf Concentration and Processing
(SCP) card, and the Models 8955, 8965, and 8985 ATM line cards.
Document Summary
Section Description
Chapter 1, Introduction Provides general information about what types of cards
can be used in the Hotwire 8620 GranDSLAM and
GranDSLAM features.
Chapter 2, Installation Describes what is supplied with the Hotwire 8620
GranDSLAM, how to install it, and how to install cards into
the chassis.
Chapter 3, Cabling Describes how to install various cables used by the
Hotwire 8620 GranDSLAM and its cards.
Chapter 4, Troubleshooting Lists suggested solutions to possible GranDSLAM
problems and describes the GranDSLAM LEDs.
Appendix A, Pinouts Provides pinouts for the GranDSLAM connectors as well
as for connectors on cards that can be used in the
GranDSLAM chassis.