Filter
Top Products
B. Technical Specifications
B-2 July 2003 8620-A2-GN20-40
Grounding A ground lug is located on the right rear of the Hotwire 8620
GranDSLAM. It accepts 14 AWG wire.
A noninsulated banana jack is located at the left front of the Hotwire
8620 GranDSLAM providing a ground for the ESD wrist strap plug.
Cooling and
Air Handling
The internal fans are installed in the chassis to provide cooling.
A built-in feature shuts off power to the circuit cards if a chassis
overheats because of fan failure. If the temperature in the chassis
reaches 70°C, power to the cards in the chassis is turned off
automatically. Power is turned on when the temperature drops below
60°C.
Operating
Environment
Ambient Temperature for system: 32° to 122° F (0° to 50°C)
Ambient Temperature for chassis only: 32° to 140° F (0° to 60°C)
Relative Humidity: 15% to 99% noncondensing
Shock and vibration sufficient to withstand normal shipping
Table B-1. Hotwire 8620 GranDSLAM Technical Specifications (2 of 2)
Specifications Criteria*
* Technical Specifications subject to change without notification.