Filter
Top Products
Using a browser to complete Model 3196RC configuration 49
Model 3196RC T-DAC User Manual 3 • Configuring the T-DAC for operation
The following notation should be used for assigning timeslots:
• dash: (-), e.g., 1-3
• comma: (,), e.g., 1,4,9
• combo: 1-2,3,6-7
Examples for configuring static connections.
Three examples are provided:
• Example 1: Connecting an iDSL modem port to an E1 WAN port.
• Example 2: Connecting an E1 WAN port to another E1 WAN port.
• Example 3: Connect an iDSL modems port to another iDSL modem port.
Example 1
Connect iDSL modem, Port 3 (referring to modem #3), time slots 1 - 3, to an E1 line on (WAN) Port 1, time
slots 1 - 3.
Solution:
1. Under Dev Type A, select iDSL(3).
2. Under Dev Num A, select port3(3).
3. Under Dev Slots A, enter 1 - 3.
4. Under Dev Type B, select t1-e1(1).
5. Under Dev Num B, select port1(1).
6. Under Dev Slots B, enter 1 - 3.
7. Click the
Submit Query
button.
Note
At this point the DS0 channel mapping is completed. Now is time to
configure the DTE data rate of the iDSL modem, refer to section
“Activating the iDSL ports” on page 54.