Filter
Top Products
Using a browser to complete Model 3196RC configuration 54
Model 3196RC T-DAC User Manual 3 • Configuring the T-DAC for operation
Activating the iDSL ports
Do the following to activate an iDSL port:
1. On the 3196RC Configuration Menu, click the DSL hyperlink to display the iDSL Port Configuration
page (see figure 33). (Optional: Using your mnemonic naming convention scheme, enter a name for this
connection in the “Circuit ID” field to the right of the Port # you wish to activate).
Figure 33. iDSL Port Configuration window
2. From the Desired State drop-down menu, select activate(1).
3. Click the “Submit” button to record your changes in volatile DRAM.
You have now completed the procedure to activate one iDSL port. To activate additional iDSL ports, repeat
the above procedure for each port you wish to activate.
Configuring Patton iDSL CPE device remotely via the Model 3196RC
Once an iDSL link is established between the 3196RC port and a Patton Customer Premise Equipment (CPE)
iDSL device, (such as the Model 3092) you may use the 3196RC Web Management pages to remotely config-
ure DSL port parameters on the CPE device. The following DSL port parameters may be configured remotely:
• Serial DTE Rate