Filter
Top Products
Using a browser to complete Model 3196RC configuration 57
Model 3196RC T-DAC User Manual 3 • Configuring the T-DAC for operation
3. Click the [change configuration] button to display the configurable parameters for the Patton CPE device
on the right-hand side of the page (see below).
4. Use the drop-down menus to set the configurable parameters to your desired values.
5. Click the [submit] button to record your changes on the remote Patton CPE. You will automatically
return to the iDSL Port # Details page.
You have now completed the procedure to remotely configure one Patton iDSL CPE device via the Model
3196RC. To activate additional Patton CPE devices, repeat the above procedure for each device you wish to
configure.
Configuring line settings and signaling for E1
Accessing the Line Interface Settings
1. On the 3196RC Configuration Menu, click the T1/E1 Link hyperlink to open the T1/E1 LINK ACTIV-
ITY OVERVIEW page (see figure 34).
Figure 34. T1/E1 Link Activity Overview page
2. View Link 1 corresponds to the first WAN circuit on the T-DAC. To the right of View Links 1-4 click the
View Links... hyperlink to open the T1/E1 LINK ACTIVITY PORTS 1 – 4 page (see figure 35).